FLOOR and more® power

Dry hollow floor for heavy-duty areas

Listed by applicability

Applications

Recreation and Culture: Banks, Cinemas and Theatres, Concert Halls, Museums, Places of Assembly, Sales Areas, Shopping Centres, Gymnasiums, Stadiums
Workplace: Assembly Rooms, Broadcasting Rooms, Television Studios, Common Rooms, Facilities for Meetings, Conventions and Conferences, Stage and Studio Rooms, Offices
Education: Library Rooms, Research Rooms, School, School of Higher Education
Transport: Airports, Subways and Tunnels, Train Stations
Healthcare: Clinics and Hospitals, Laboratories, Operating Theatres
Industry: Production Facilities, Laboratories and Research Facilities, Power Plants
Public Areas: Entrance Areas, Escape Routes
Public Institutions: Court Houses, Government Buildings
Hotels and Gastronomy: Commercial Kitchens, Restaurants and Canteens, Hotels and Resorts

Requirements

Design: Aluminium, Elastic, Fabric, Gypsum, Stainless Steel, Steel, Stone, Wood
Hygiene: Antibacterially disinfectable, Cleanable by vacuuming, Virucide disinfectable, Wipeable
Safety Technology: Electrostatics, Explosion Protection, Intruder Protection, Radiation Protection
Statics: Heavy-Duty Loads, Seismic Safety, Walkability
Climatic Regulation: Heating and Cooling, Thermal Insulation
Corrosion Protection: Interiors, Wet Areas
Fire Protection: Fire Behaviour / Building Material Class, Fire Resistance
Sustainability: Cradle to Cradle Certified, Environmental Product Declaration
Acoustics: Airborne Sound Reduction, Longitudinal Sound Reduction, Impact Sound Reduction

Technical Data

Fire Protection

Sustainability

Statics

Accessories

Facings

Stairs, platforms, etc. need to be finished with front claddings (facings).
In case of corresponding requirements, e. g. open borderings, the facings' top edges are covered with stair edging profiles. In addition, a ground fastening with brackets and the bracing installed in the upper area of the facing ensure a stable construction.

Expansion joints

In order to take up horizontal and vertical movements in a structural and inconspicuous manner, expansion joint profiles are used in the area of the hollow floor, adapted to the application.

Electrical outlets

As all electrical installations are laid under the hollow floor, electrical connections can be placed exactly where you want them by the insallation of electrical outlets.

Cavity barriers

Three different types of cavity barriers can be possible to meet the different requirements in the hollow floor area.

Ventilation barriers made from coated chipboard panels
Fire protecion barriers made from solid gypsum wall blocks (min. 80 mm)
Sound protection barriers made from foam mortar (min. 100 mm)

Air ventilation outlets

Air ventilation outlets allow the room to be air-conditioned and ventilated without creating draughts.

Various systems are available:

open system
Ventilation takes place directly in the cavity for installations, which is designed as a pressure floor, through the corresponding air ventilation outlets or rather through the hexagonal ventilation outlets into the room.
closed system
In a closed system, the air is fed through a pipe system or through cavity barriers with fixed connections to the air ventilation outlets

Revision openings

As a matter of course, hollow floors also have to guarantee easy access to the installations. For this purpose, FLOOR and more® can be equipped with revision openings. The removable floor panels are supported by a sturdy and surrounding frame which ensures the high stability of the floor construction.
The covering separation rails and rubber seal lips can be visually adjusted to the chosen floor covering - so the revision opening blends into the floor surface inconspicuously.

Bridging profiles

Due to structural reasons bridging is required where pedestals cannot be installed.
In such cases, special bridging profiles are available which are easy to install and improve at the same time dynamic and static load-bearing capacities.

Reinforcement profiles

Standard Lindner floor systems already exhibit high load-bearing capacities. Should these still not be sufficient, the system can be upgraded by reinforcement profiles. Various options are possible, from the lightest stringer which increases lateral rigidity through to a C-profile.

Contact

Downloads

Product description

FLOOR and more^® power shoulders the weight of heavy-duty situations. In certain circumstances floors need to withstand heavier loads, for example foyers, manufacturing plants, museums and libraries. In such situations, FLOOR and more^® power offers unbeatable load-bearing strength. The floor system carries immense loads.